Standards Compliance
|
DVI v1.0, HDMI v1.4, HDCP v1.4
|
Maximum Pixel Clock Frequency
|
340 MHz
|
Maximum Video Bit Rate
|
3.40 Gbps. / 10.3 Gbps. (Aggregate)
|
Supported Color Depth
|
12-bit
|
Supported Resolutions
|
Up to 4K: 3840x2160 /30p (4:4:4), 3840x2160 /60p (4:2:0)
|
Digital Audio Support
|
Embedded HDMI digital audio up to 8-channel (7.1) LPCM, 192 kHz, 24-bit audio capability
|
HDMI Input / HDMI Output
|
1 ea. 19-pin Female HDMI connector
|
Optical
|
1 ea. LC fiber optic connector
|
Power
|
1 ea. USB Micro-B female connector
|
Diagnostic LEDs
|
Power, Optical Link
|
Optical Technology
|
2x Discrete Optical Channels
|
Optical Wavelengths / Data Rates
|
1310 nm and 1550 nm / 10.3 Gbps. and 250 Mbps.
|
Optical TX Unit
|
1310nm FP laser diode and 1550nm PIN photo diode, Class 1 laser products
|
Optical RX Unit
|
1550nm FP laser diode and 1310nm PIN photo diode, Class 1 laser products
|
Optical TX Output Power
|
10.3 Gbps.: -6.0 dBm (minimum) / 0.0 dBm (maximum)
|
Optical TX Extinction Ratio
|
10.3 Gbps.: 3.5 dBm (minimum) / 7.0 dBm (maximum)
|
Optical RX Input Sensitivity
|
10.3 Gbps.: -14.5 dBm (minimum)
|
Optical RX Max. Input Power
|
10.3 Gbps.: 0 dBm (maximum)
|
Optical Link Power Budget
|
8.5 dB (minimum)
|
Maxium Cable Length
(typical)
|
HDCP Not Supported:
9/125μ Single-Mode Fiber: > 1.2 miles ( ~ 2,000 meters)
50/125μ OM4 Multi-Mode Fiber: > 2,600 ft. ( ~ 800 meters)
50/125μ OM3 Multi-Mode Fiber: > 1,800 ft. ( ~ 500 meters)
HDCP Supported:
All Fiber Types: 1,000 ft. (~ 300 meters)
|
DVIGear Fiber Cable
|
OFNP, Plenum-rated - additional data and custom lengths available on request
|
Cable Jacket
|
OFNP, Plenum-rated, Black PVC Jacket
|
Cable Outside Diameter
|
0.2" (4.4 mm)
|
EDID Support
|
EDID of connected display is transparent
|
HDCP Support
|
Supports HDMI signals with or without HDCP encryption
|
Case Dimensions (L x W x H)
|
2.3" x 0.9" x 0.4" (59.4 mm x 22.3 mm x 10.9 mm)
|
Weight
|
0.92 oz. / 26 g (each unit)
|
Construction
|
High-impact metal enclosure with black finish
|
Operating Temperature
|
+32° to +158° F (0° to +70° C)
|
Storage Temperature
|
-40° to +185° F (-40° to +85° C)
|
Operating Humidity
|
5% to 80% (non-condensing)
|
Storage Humidity
|
5% to 95% (non-condensing)
|
Optical Transmitter / Receiver
|
The TX and RX units should be powered by the supplied external power adapters. The TX can be powered using an optional USB adapter cable (see below).
|
External AC Power Adapters
|
Model No: DVI-7331-PS
Input: 100-240VAC / 50-60Hz 0.4A
Output: 5VDC, 2.0A
|
Maximum Power Consumption
|
TX Unit: 320mA (1.76 watts)
RX Unit: 320mA (1.76 watts)
|
Fiber Optic Extender Unit
|
FCC Class B, CE, RoHS, IEC EN60601-1-2:2007
|
Laser
|
US-FDA CDRH Class 1, IEC60950, IEC60825-1
|
External AC Power Adapters
|
FCC, CE, UL, C-UL, CEC, PSE, GS, RoHS, WEEE
|
Limited Warranty
|
3 Years Parts and Labor
|
DVI-7317
|
4K HDMI Fiber Optic Extender, 1x LC
|
DVI-7317-TX
|
4K HDMI Fiber Optic Transmitter, 1x LC
|
DVI-7317-RX
|
4K HDMI Fiber Optic Receiver, 1x LC
|
DVI-CUST-OPT
|
Custom Fiber Optic Cable, Plenum-rated,
Specify: Length, Fiber Type (OM3, OM4, SMF) and Connector (LC)
|
2x External AC Power Adapters (DVI-7331-PS) with USA plug,
1x Quick Start Guide,
4x Heat Insulation Pads
|
External AC Power Adapter (p.n. DVI-7331-PS) with Euro, UK, or Australia plugs,
USB Type A Male to USB Micro-B Male Adapter Cable (p.n. DVI-7332-PSX),
+5 VDC Power Distribution Unit (p.n. DVI-7525-PDU),
Custom Optical Cables (contact DVIGear for details)
|